SOWAKAM operation panel function description
Operation panel function
The operation panel can modify and copy the inverter parameters, monitor the inverter working status and control the inverter operation (start, stop) etc. As shown in the figure below:
1. Indicator light description
FOR/REV indicator light:
FOR | REV | State |
ON | OFF | Running FOR |
OFF | ON | Running REV |
OFF | OFF | Stop |
L/R, Hz, A, RPM indicator lights: used to monitor the meaning of the inverter display data
2. Display screen
There are 5 LED displays in total, which can display the set frequency, output frequency, various monitoring data and alarm codes, etc.
3.Keyboard buttons
Button | Name | Function |
RUN | Operate Button | Start the inverter directly by pressing the key on the panel |
STOP | Stop / Reset key | Used to stop the inverter or reset the inverter |
| Displacement key | in case of failure. |
FOR/RE | FOR and REV | Used to display data circularly in the main interface;Or |
PROG | switch key | when modifying a parameter, select the modification bit |
| Menu key | of the parameter. |
4. Encoder
Used to increase or decrease data or parameters, clockwise rotation is increasing, counterclockwise rotation is decreasing.
